| ISOSTATIC AM-2833-45 Sleeve Bearings | T min.:-40 °C; d:22.22 mm; Designation of open end cover:SCOU205-14; L:95 mm; J:70 mm; e:19 mm; Z:42.4 mm; N:11,5mm; B:34 mm; A1:11 mm; |
| ISOSTATIC FB-710-10 Sleeve Bearings | Minimum Buy Quantity:N/A; Dynamic load, C:46.5 kN; Nlim (grease):6,100 rpm; Weight / Kilogram:0; Manufacturer Name:NTN; B:20.64 mm; Y2:1.71; Max operating temperature, Tmax:120 °C; Inventory:0.0; Category:Roller Bearings; |
| ISOSTATIC EP-404864 Sleeve Bearings | Characteristic inner ring frequency, BPFI:7.79 Hz; Characteristic outer ring frequency, BPF0:5.21 Hz; Manufacturer Name:NTN; da max:75 mm; r1a max:2 mm; D:130 mm; Min operating temperature, Tmin:-40 °C; da min:71 mm; Category:Bearings; Minimum Buy Quantity:N/A; |
| ISOSTATIC AA-744-3 Sleeve Bearings | A1:18 mm; Dz:110 mm; B1:71.3 mm; A:43 mm; Designation of bearing:EX211G2; J:130 mm; s1:48.4 mm; T max.:100 °C; A2:68.6 mm; C:43.55 kN; |
| ISOSTATIC CB-2832-12 Sleeve Bearings | Weight:3.93 kg; S:25.4 mm; G:M6x1; J:202 mm; s1:32.55 mm; T max.:100 °C; Designation of closed end cover:SCC212; A1:18 mm; d:61.91 mm; e:29 mm; |
| ISOSTATIC CB-1824-32 Sleeve Bearings | Designation of closed end cover:SCC210; A2:37 mm; Weight:2.6 kg; N:29mm; A1:16 mm; L3:86 mm; A:49 mm; A5:32.6 mm; C:35.1 kN; N2:49 mm; |
| ISOSTATIC ST-1224-1 Sleeve Bearings | Ring Size:Standard; Bearing Inner Ring Material:Steel; Bearing Bore Shape:Round; Bearing Locking Device:Tapered Adapter Slee; Retainer Material:Polymer; UPC:782475964666; Housing Coating:No Coating; End Cap Groove:Yes; Grease Type:Mobilgrease FM222; d:1.2500 in; |
| ISOSTATIC CB-1624-14 Sleeve Bearings | C0:11.2 kN; S:15.9 mm; SW:3 mm; G:R1/8"; H2:41 mm; L1:225 mm; A5:22.2 mm; Designation of bearing:UC206G2L3; A:21 mm; d:30 mm; |
| ISOSTATIC B-2226-20 Sleeve Bearings | T min.:-40 °C; Z:62.3 mm; H1:14.5 mm; L:130 mm; Recommended tightening torque for set screw:5.5 Nm; N:11mm; Weight:0.66 kg; Designation of bearing:EX204G2T04; B1:43.5 mm; B:34 mm; |
| ISOSTATIC CB-0816-08 Sleeve Bearings | Brand:NTN; d:44.45 mm; Characteristic cage frequency, FTF:0.44 Hz; ra max:2.8 mm; Fatigue limit load, Cu:6.8 kN; d1:61 mm; Nlim (grease):4,600 rpm; B:17.46 mm; Characteristic rolling element frequency, BSF:8.16 Hz; r1a max:1.5 mm; |